Pumps

We can supply Pumps for a wide range of Chemicals and Applications.

Manual Drum Pumps

Pump for 25 Litre Drums

Lift Pump Model 5G

All Plastic Construction.
1.5m delivery Hose
0.1 litres per stroke.

Manual pump for oils

Rotary Pump, model SC20

Rotary action
Cast-iron construction
20 Litres per minute (max.)
2" BSP barrel adaptor
1250mm delivery hose
42" (1015) rigid riser tube to suit 36" (914mm) deep drums and tanks
Suitable for all petroleum products

Manual pump for solvents

Stainless Steel Lift Pump, model SS3

0.3 litres per stroke – 14 litres per minute approx.
Threaded 2" &1½" BSP
Suitable for all petroleum products, non corrosive solvents,
thinners, anti-freeze etc.

Manual pump for corrosives

Rotary Pump, model RST

Made Exclusively from Teflon and 304 Stainless Steel
Suitable for extremely aggressive chemicals and solvents, highly concentrated acids and alkalis up to 100%

For Corrosives: Lift Pump, model LPR4S

Ryton body
Teflon Piston and Components
Viton Seal
Suitable for light oils, paraffin, Diesel, Alcohol, Water,
Water based chemicals, Mild solvents, Anti-freeze, Acid and Alkali solutions, Strong Acid, etc.
Black Body Pump

Electric Drum Pumps

Electric drum pump for Light Oils

W40

Electrically operated 220/240 volt ac
Plastic Construction
Threaded 2" BSP
40 Litres per minute (max.)
Suitable for Diesel, Paraffin and very light oils with flash point above +55ºC
Comes Complete with riser hose to be cut to desired length and inlet strainer
4 metres delivery hose and trigger nozzle

Electric drum pump for Heavy Oils

V25

Electrically operated 220/240v AC
Suitable for motor and gear oils up to SAE 80 at 20ºC
Capacity up to 30 Litres per minute (max.)
Threaded 2" BSP
4 Metres delivery hose and trigger nozzle

Electric drum pump for Flammables

Ex rated

Suitable for emptying of drums
Consists of: Motor ME II 3, Pump Tube, 2 X Hose Connection Brass, 2.5 Solvent Hose, nozzle brass/ PTFE, Bonding Cable, Drum adapter PP

Characteristic Data:
Density: max. 1.6 kg/dm³
Viscosity: max. 350 mPas
Flow Rate: max. 95 I/min
Delivery Head: max. 14 mwc

Electric drum pump for Corrosives

For 25l – 200L Drums

Electric drum pump for Concentrated Acids

Suitable for emptying of drums and containers
Consists of: Motor MA II 5, Pump Tube, Hose connection, Chemical Hose, Nozzle PVDF.

Characteristic Data:
Density: max. 1.8 kg/dm³
Viscosity: max. 800 mPas
Flow rate: max. 80 I/min
Delivery Head: max. 17 mwc

Pump Sales

Contact our Sales Department on 061 225005
or email us for a free quotation.